Ikea Repeater Pairing. Connecting IKEA repeater to hubitat 🛎️ Get Help Hubitat Then click on the button Permit join (name repeater).Start pairing the devices Press and hold the paperclip in the hole for 2-4 seconds (you will feel the paperclip depressing a tiny button inside the repeater).
TRÅDFRI signal repeater IKEA from www.ikea.com
Welcome to the IKEA Home Smart sub (Formally TRÅDFRI Sub) You're using the remote to bring the repeater into the network by performing the key exchange.
TRÅDFRI signal repeater IKEA
( It appears you need a Tradfri gateway to re-pair the signal repeater ( It appears you need a Tradfri gateway to re-pair the signal repeater For wireless signal repeater: Push a pin into the pinhole on bottom of the signal repeater for at least 5 seconds
Zigbee2MQTT & aqaradevices pairing with Sonoff ZBBridge as router not. After reset the signal repeater you must pair your steering device to the signal repeater and then pair the steering device to your IKEA Home smart product product again Welcome to the IKEA Home Smart sub (Formally TRÅDFRI Sub)
TRÅDFRI signal repeater IKEA. The hardware is designed for people with limited tech skills It is quite easy to "miss" the reset Button through the little hole in the case.